image description

Minster offers a wide range of acoustic insulation materials from the leading manufacturers such as Cellecta, Fermacell, Monarfloor, Isover, URSA and Rockwool.

Having poor acoustics can be a serious problem as it leads to noise pollution. In office buildings, poor acoustics can cause low concentration levels and decreased productivity. It is also critical to have good acoustics in teaching and learning spaces so that students can clearly to understand what the teacher is saying, and concentrate.

We provide detailed knowledge of the acoustic properties of construction materials, which is essential for the design of good acoustic environments.

In addition, we offer unrivalled technical services and support, via a team of experts who understand the implications of Approved Document E (Section 5, Scotland) and can recommend bespoke acoustic solutions to meet your needs.

Our acoustic products are environmentally friendly, high performing and durable.

Remember to contact your local branch if you cannot find what you want on this site.

Acoustics / Insulation

Deckfon Acoustic Overlay Treatments

Cellecta - Deckfon Acoustic Overlay Treatments

Deckfon CHiP MDF and ScreedBoard shallow composite floor systems consist of a layer of polyurethane foam bonded to a tongue and grooved flooring board.

Deckfon Battens

Cellecta - Deckfon Battens

Deckfon Battens consist of a strip of flexible, polyurethane foam bonded to a treated timber batten.

Deckfon Ultralay

Cellecta - Deckfon Ultralay

Deckfon Ultralay acoustic improvement mat will dramatically reduce impact sound transmission through concrete floors

Deckfon Ultramat 15

Cellecta - Deckfon Ultramat 15

DECKfon Ultramat 15 is a high density, open-cell, recycled polyurethane acoustic mat. It is the quickest and easiest way to dramatically improve the acoustic performance of a decked timber floor where the ceiling cannot be disturbed and the floor height to ceiling height is restricted.

Fiberfon MICRO SLAB

Cellecta - Fiberfon MICRO SLAB

Fibrefon MICRO SLABS are high performance, no-itch sound absorption materials for walls and ceiling applications. The high absorption properties result in 50% less thickness required to achieve the same level of sound absorption as traditional mineral wool quilts or slabs.

Fibrefon Acoustic Treatments

Cellecta - Fibrefon Acoustic Treatments

Fibrefon CHiP boards are a high compressive strength for applications where lighweight partitions are to be built off the floor finish. All treatments are F-FT-5 compliant when used to reduce impact sound transmission through separating concrete floors.

Fibrefon HiGYP 28

Cellecta - Fibrefon HiGYP 28

FIBREfon HiGYP 28 are high density composite wall boards that will dramatically reduce airborne sound transmission through all types of existing or new build timber stud, metal frame and masonry walls.

Fibrefon HiGYP 30TM

Cellecta - Fibrefon HiGYP 30TM

FIBREfon HiGYP 30TM are high performance acoustic wall boards specifically designed to be used in conjunction with FIBREfon Baffle strips to significantly reduce airborne noise transmission in timber floor and masonry wall developments.

Screedboard

Cellecta - Screedboard

Screedboard 28 is a high performance, dry screed acoustic treatment for timber floors. It carries its own proprietary Robust Detail E-FT-5 when used in conjunction with timber I-joist. Alternatively it is compliant with Robust Detail F-FT-4 when laid on structural concrete floors.

Yelofon CHIP acoustic treatments

Cellecta - Yelofon CHIP acoustic treatments

Yelofon CHiP shallow composite acoustic flooring system comprises a 10mm Yelofon water resistant, cross-linked polyethylene foam and a moisture resistant tongue and groove chipboard to produce a floating floor treatment that doesn't require a DPM. Yelofon CHiP 23 and 28 conform to the stringent requirements of the Robust Detail F-FT-5.

Yelofon resilient layers

Cellecta - Yelofon resilient layers

Cellecta's HD5 and HD10+ are both high density, non-cross-linked, polyethylene resilient layers designed to reduce impact sound transmission through concrete floors covered with a floating screed. HD10+ carries its own Robust Detail E-FC-5 when used as a single layer to isolate floating screed from a pre-cast concrete structural floor.

Yelofon Resilient Layers and Acoustic Treatments

Cellecta - Yelofon Resilient Layers and Acoustic Treatments

Cellecta’s HD5 and HD10+ are both high density, non-cross-linked, polyethylene resilient layers designed to reduce impact sound transmission through concrete floors covered with a floating screed. HD10+ carries its own Robust Detail: E-FC-5 when used as a single layer to isolate flooring screed from a pre-cast concrete structural floor. Yelofon CHiP shallow composite acoustic flooring system comprises a 10mm Yelofon water resistant, cross-linked polyethylene foam and a moisture resistant tongue and groove chipboard to produce a floating floor treatment that doesn’t require a DPM. Yelofon CHIP 23 and 28 conform to the stringent requirements of the Robust Detail F-FT-5

Yelofon Strips

Cellecta - Yelofon Strips

Yelofon ES, FS and E-strip extruded polyethylene strips address the risk of acoustic flanking around the floor perimeter, which can adversely affect the acoustic efficiency of the floor. A multitude of thicknesses and heights are available to suit the specific acoustic treatment used.

Flooring Accessories

Fermacell - Flooring Accessories

Flooring Elements

Fermacell - Flooring Elements

Flooring Elements are designed to be used as floating floor treatments in a wide variety of applications. They can be used to increase the acoustic, thermal and fire preformance of many types of floor constructions.

Accessories

Icopal Monarfloor - Accessories

Monarfloor® Flanking Band isolates party and flanking walls reducing both impact vibration transmission from the floor and the flanking sound transmission path within the building

Acoustic Batten

Icopal Monarfloor - Acoustic Batten

Monarfloor Acoustic Batten System is designed to reduce sound transmission through both timber and concrete floors and can be overlaid directly with an 18mm or 22mm chipboard deck.

Bridgestop system

Icopal Monarfloor - Bridgestop system

Monarfloor Bridgestop system [E-WM-19 / Appendix A2] is an acoustic isolation membrane kit that separates the two skins of a cavity party wall and enables the party wall to be constructed off a continuous raft or transfer slab, thus offering the industry significant cost-savings and scores maximum credits under the Code for Sustainable Homes for a wall: 4 Credits.

Deck Overlay Systems

Icopal Monarfloor - Deck Overlay Systems

Proven high performance floating floor treatment acoustic systems. Low Resonance Acoustic Chip (LRAC). Excellent impact improvement characteristics and superior stability within a single layer. All Monarfloor systems are flame retardant.

Floor Screeding Acoustic Isolation System [E-FC-11]

Icopal Monarfloor - Floor Screeding Acoustic Isolation System [E-FC-11]

One-part, lightweight, acoustic isolation system that reduces impact and flanking transmission with pre-cast and in-situ concrete floors and either sand and cement or proprietary flow screed. Tranquilt is a one part system with integral flanking, jointing, corner elements, which acts as an integral vapour control layer.

Soft Bonded Floor Covering (E-FC-8)

Icopal Monarfloor - Soft Bonded Floor Covering (E-FC-8)

Monarfloor Tranquility isolates wood and laminate floors from the sub floor preventing impact noise transmission. One part system within integral peel back self-adhesive.

Acoustic Partition Roll (APR 1200)

Isover - Acoustic Partition Roll (APR 1200)

A glass mineral wool roll providing high levels of acoustic insulation in partitions, walls and floors to meet acoustic requirements in domestic and non-residential applications. The product carries a system lifetime performance guarantee when used in British Gypsum SpecSure warranted drywall and floor systems. The rolls push-fit between 600mm stud centres making it easy to install.

Acoustic Slab

Isover - Acoustic Slab

A glass mineral wool slab providing high levels of acoustic performance in wall-lining systems, partitions and modular building applications. The product carries a lifetime system warranty when used in British Gypsum SpecSure ® warranted drywall systems.

Acoustic Slabs – High Performance

Isover - Acoustic Slabs – High Performance

A glass mineral wool slab providing high levels of acoustic and thermal performance in wall-lining systems, partitions and modular building applications.

Acoustic Slabs – Multi-Purpose

Isover - Acoustic Slabs – Multi-Purpose

A glass mineral wool slab providing high levels of acoustic performance in wall-lining systems, partitions and modular building applications.

RD Acoustic Floor Slab

Isover - RD Acoustic Floor Slab

A stone mineral wool slab with enhanced resilience providing impact sound insulation in separating floor constructions.

RD Party Wall Roll

Isover - RD Party Wall Roll

A glass mineral wool roll designed for use in E-WM-6, E-WM-10, E-WM-13 and E-WM-17 Robust Detail wall constructions to meet Part E Building Regulations (England and Wales) and Section 5 (Scotland). Significant cost savings can be obtained since there is no need for pre-completion testing and additional savings can be made with E-WM-17 since it removes the need for wet plaster or parge coats.

RD35

Isover - RD35

A foil-faced glass mineral wool slab designed for use in E-WM-8, E-WM-14 and E-WM-15 Robust Detail wall constructions to meet Part E Building Regulations (England and Wales) and Section 5 (Scotland). Provides excellent acoustic performance in dry-finish masonry party walls, removing the need for wet plaster or parge coats.

Sound Deadening Floor Roll

Isover - Sound Deadening Floor Roll

A glass mineral wool roll designed to provide the resilient layer specification for Type 2 concrete base intermediate separating floors, with either timber or screed floating layers, as described in Building Regulations Part E (England & Wales) and Section 5 (Scotland).

Sound Deadening Floor Slab

Isover - Sound Deadening Floor Slab

A stone mineral wool slab designed to provide impact sound deadening performance in Type 3 timber base separating floors, as described in Building Regulations Part E (England & Wales) and Section 5 (Scotland).

Floorfoam and Floorfoam Easy Edge Strip

Knauf Insulation - Floorfoam and Floorfoam Easy Edge Strip

An extruded polyethylene cushioning system for reducing impact sound in floors

Acoustic Membrane

Rockwool - Acoustic Membrane

A flexible high density polymer mass layer. When combined with Rockwool insulation products, such as Hardrock Dual Density roofing board, Acoustic Membrane offers high performance and economic acoustic solutions for flat roofing & built-up metal roofing systems.

Acoustic Slab

Rockwool - Acoustic Slab

Designed to combine optimum acoustic and fire performance with easy fitting into metal partitions. Acoustic slab can meet, and exceed, the requirements of AD Part E for internal walls (40bd), when used in internal wall construction Type B (from AD Part E, section 5). λ = 0.037W/mK

Rockfloor

Rockwool - Rockfloor

Acoustic Rockfloor with square edge. Rockfloor can be used in solutions to comply with Robust Detail constructions for separating floors (Ref E-FC-1, E-FS-1). λ = 0.04W/mK.

Acoustic Roll

URSA - Acoustic Roll

Lightweight glass mineral wool for sound insulation in metal and timber stud partitions.


Forgot Password?